ARMSTRONG BRACKET ONLINE REQUEST FOR QUOTE FORM   Click here for Instructions

BOAT INFORMATION:

YEAR:

MAKE/MODEL:

LENGTH:

COLOR:

TRANSOM INFORMATION:

ANGLE: 

THICKNESS:

Transom Shape:    Flat (Straight Across From Side to Side): 

      Curved:          Notched:

STATIC WATER-LINE:         
BOW HEAVY:
STERN HEAVY:   LEVEL:



Note:  The Carpenter's Square must be a large Carpenter's Square with a long side length of 22.5 inches.

MEASURING THE TRANSOM ANGLE:

1.  Use a standard carpenter's square (22.5"x14")

2.  Place a carpenter's square, with the long side (22.½") under the keel or to the outside edge of the hull, parallel with the chine. 

3.  Place the short side against the transom vertically.

4.  Take the measurement (see sketch) between the inside corner of the square and the boat transom. 

Each 1/4" is equal to 1° in transom angle.
 

If this is a repower, previous power was:

I/O   Sea-Drive   O/B
Total HP

 NEW ENGINE INFORMATION:

# OF ENG:

YEAR:

MAKE/MODEL:  

TOTAL HP:

TOP SPEED:

SHAFT LENGTH:
KICKER ENGINE?:
YES
BOAT USE:
                              CRUISING:          FISHING:          DIVING:          SKIING:         SWIMMING:          OTHER:

TRANSOM MEASUREMENTS:

CUSTOMER INFORMATION:

 
COMPANY:
NAME:
POSITION:
ADDRESS:
   
CITY: 
STATE:         ZIP:
COUNTRY:
PHONE:   FAX:
EMAIL

Please Supply Measurements:

 "A" Transom height at center          
 "B"  Transom height 15" from center
 "C"  Width of Transom at the top 
  "D"  Width of Transom at the bottom
 "E"   Flat area dimension (Pad)
 

Do You Want Platforms?   YES   NO

Platform Width To Be: inches.
Built-in Ladder Mount?   YES   NO
Location?   Port   Starboard

Comments:

If you need assistance with submitting your boat information, click on the button below.

Assistance